|
Advantage: Products › Telebelts › TB 110
|
 |
TB 110
The TB 110 can place concrete at high volumes up to 360 yd³/hr (275m³/hr) and convey a wide variety of materials ranging from sand to 4" (100mm) rock. With its steel/aluminum truss and three aluminum sections, this four-section telescopic conveyor offers 106' 1" (32.34m) of horizontal reach. The unit can set up and operate under heights as low as 15' 9" (4.80m).
 
 |
|
Range Diagram
|
|
Outrigger Spread
|
|
|
Belt Conveyor Specifications
|
| Height and Reach |
Conveyor horizontal reach:
maximum at 0°
maximum at 30°
|
106' 1"
91' 6" |
32.34m
27.91m |
| Conveyor belt width |
18" |
457mm |
| Feed conveyor length |
38' |
11.60m |
| Feed conveyor belt width |
18" |
457mm |
| Trunk/end hose length |
15' |
4.57m |
Discharge height from grade:
maximum at 30°
maximum at -15° |
60' 2"
-20' |
18.36m
-6.11m |
Rated capacity at 0°:
main and feed conveyors |
6 yd³/min
360 yd³/hr |
4.60m³/min
275m³/hr |
Rated capacity up to 20°:
main and feed conveyors |
3.80 yd³/min
230 yd³/hr |
2.90m³/min
175m³/hr |
| Outriggers |
Net reach beyond outriggers
at 0°
at 30° |
100' 6"
86' |
30.65m
26.23m |
Outrigger spread L - R - front
hydraulically rotate out and down |
23' 1" |
7.05m |
Outrigger spread L - R - rear
hydraulically rotate out and down |
26' 9" |
8.17m |
|
All TB 110 specs based on Model MACK MRU 613.
Maximum theoretical values listed above. |
|
Transport Axle Weights
|
| Based on Model Mack MRU 613 |
| Steering |
19,253 lbs |
8,733kg |
| Pusher |
11,000 lbs |
4,989kg |
| Tandem |
31,274 lbs |
14,185kg |
| Total |
61,527 lbs |
27,907kg |
|
Putzmeister Advantages
|
|
|
Specification Drawing
 |
Click Image to Enlarge |
Weights are approximate and include, truck, full hydraulic oil, driver and some fuel. Dimensions will vary with different truck makes, models and specifications.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
|
|
|
