|
Advantage: Products › Telebelts › TB 110G
|
 |
TB 110G
Placing materials from sand to 100mm rock is simple for the TB 110G, while also providing smooth, surge-free conveying results. With its steel/aluminum truss and three aluminum sections, this four-section unit offers an impressive 32.33m of horizontal reach. The unit can set up and operate under heights as low as 4.80m.
 |
Range Diagram
|
|
Outrigger Spread
|
|
|
Belt Conveyor Specifications
|
| Height and Reach |
Conveyor horizontal reach:
maximum at 0°
maximum at 30°
|
32.33m
27.91m |
| Conveyor belt width |
457mm |
| Feed conveyor length |
11.60m |
| Feed conveyor belt width |
457mm |
| Trunk/end hose length |
4.57m |
Discharge height from grade:
maximum at 30°
maximum at -15° |
18.36m
-6.11m |
Rated capacity at 0°:
main and feed conveyors |
4.60m³/min
275m³/hr |
Rated capacity up to 20°:
main and feed conveyors |
2.90m³/min
175m³/hr |
| Outriggers |
Net reach beyond outriggers
at 0°
at 30° |
31.25m
26.82m |
Outrigger spread L - R - front
hydraulically rotate out and down |
5.62m |
Outrigger spread L - R - rear
hydraulically rotate out and down |
7.71m |
|
All TB 110G specs based on Model MACK MR 688S.
Maximum theoretical values listed above. |
|
Transport Axle Weights
|
| Based on Model Mack MR 688S |
| Front |
12,974kg |
| Rear |
17,110kg |
| Total |
30,084kg |
|
Putzmeister Advantages
|
|
|
Specification Drawing
 |
Click Image to Enlarge |
Weights are approximate and include, truck, full hydraulic oil, driver and some fuel. Dimensions will vary with different truck makes, models and specifications.
Photos and drawings are for illustrative purposes only. For available options, please contact the factory.
|
|
|
