Designed for the most extreme pumping tasks
The EKO series is designed for the most extreme pumping tasks. The open filling hoppers mean that extremely dry material, which may also contain a high proportion of foreign bodies, can be fed into the pump. Materials that until now could not be pumped, such as highly dewatered paper sludge, are thrust by the hydraulically driven piston into the delivery line. The EKO crown has a transport piston with a hardened and toothed cutting edge. This pump is used where the material contains large foreign bodies. In other systems, these often lead to blocking of the pump. The EKO crown cuts and transports it in one operation.
- Conveys large-sized and coarse foreign bodies
- Conveys extremely stiff material
- Delivery pressures up to 870.226 psi (60 bar)
- Cutting force up to 176369.8 lbs (80 t )
- Outputs up to 18.31131 yd³/h (14m³/h)
Crown version for pumping and cutting in one stroke
Flow rate minimum
1.307951 yd³/h (1m³/h)
Flow rate maximum / At fill level of
18.31131 yd³/h (14m³/h) 100 %
Maximum pressure of delivery
580.151 -1450.38 psi (40 - 100 bar)
1’ 8” - 2’ 4” (500 - 700mm)
8” - 1’ 2” (200 - 350mm)
6 gal - 13 gal (22,5 - 48,0L)
Weight (without material and oil), approx.
2733.732 - 11023.11 lbs (1.240 - 5.000kg)
All data provided is based on experience and depends on the material used. Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information. Other data can be obtained on request.