Select the power
For the drive of high solids pumps, available hydraulic power rates from 7.5 kW up to 1,600 kW. Depending on the quantity of oil needed, an open or closed oil-circuit can be used. The closed oil-circuit is used when reaching large delivery capacities, which means considerable cost-savings. The oil-circuits are designed for hydraulic pressures of up to 300 bar. This equals delivery capacities of up to 150 bar, for a short time up to 160 bar.
KEY FEATURES
- Frame, oil tank, filter and cooling unit
- Main oil pump with motor
- Oil/Air cooler with electric drive (incl. partial flow filter 10 μm)
- Oil tank with filler necks, ventilation filter and control glass, drain cock and opening for inspection and maintenance
- Pressure relief valve for the oil circuit means no motor overload even at maximum operating load
SPECIAL FEATURES
All electric sensors and actuators wired to one terminal box
Fool-proof electric connection of the machine by Harting quick connection system
TECHNICAL SPECIFICATIONS
Rated power
10.0577 - 214.564 hp (7.5 - 110 kW)
Rated motor speed
1,480 rpm
Supply voltage
380 - 480 V / 50 - 60 Hz
Oil tank volume (depending on number of circuits)
53- 159 gal (200 - 600 l)
Weight, approx.
145.295 - 792.5162 lbs (550 - 3,000 kg)
All data provided is based on experience and depends on the material used. Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information. Other data can be obtained on request.