Versatile 24" conveyor with 5th wheel configuration
The maneuverable 5th wheel configuration of the Putzmeister Telebelt® TBS 600 conveyor provides a tighter turning radius and reduced axle loads for increased mobility. It has the power to deliver up to 6 cubic yards per minute (5 cubic meters per minute) over its 102 feet (31.08 meters) of horizontal reach. You can remove the semi-trailer chassis for a smaller machine footprint and more space on the job site .You can also specify the type of chassis and the trailer axle configuration on the TBS 600 to meet specific local requirements.
KEY FEATURES
- Self-contained engine for lower operation costs and reduced fuel consumption
- Flexible two or three trailer axle configuration
- 5th wheel configuration for mobility, tighter turning radius, and reduced axle loads
- Reversing conveyor feature
- Six hopper options for different job needs
SPECIAL FEATURES
LenderTrax
TECHNICAL SPECIFICATIONS
BELT CONVEYOR SPECIFICATIONS
HEIGHT & REACH
Number of sections
4
Conveyor horizontal reach: maximum at 0°
100' 11" (30.76m)
Conveyor horizontal reach: maximum at 29°
88' 6" (27.00m)
Conveyor belt width
24" (610mm)
Conveyor belt width
24" (610mm)
Feed conveyor length
38' 0" (11.60m)
Feed conveyor belt width
24" (610mm)
Trunk/end hose length
15' 0" (4.57m)
Discharge height from grade: maximum at 29°
55' 0" (16.78m)
Discharge height from grade: maximum at -15°
-20' 1" (-6.11m)
Observed capacity at 0°: main conveyor by minute
6.00 yd³/min (5.00m³/min)
Observed capacity at 20°: main conveyor by minute
6.00 yd³/min (5.00m³/min)
Rotation-hydraulic
360°
OUTRIGGERS
Net reach beyond outriggers: at 0°
95' 1" (29.00m)
Net reach beyond outriggers: at 29°
88' 6" (27.00m)
Conveyor belt width
24" (610mm)
Feed conveyor length
38' 0" (11.60m)
Feed conveyor belt width
24" (610mm)
Discharge height from grade: maximum at 29°
55' 0" (16.78m)
Discharge height from grade: maximum at -15°
-20' 1" (-6.11m)
Observed capacity at 0°: main conveyor by minute
6.00 yd³/min (5.00m³/min)
Observed capacity at 20°: main conveyor by minute
6.00 yd³/min (5.00m³/min)
Rotation-hydraulic
360°
Net reach beyond outriggers: at 0°
95' 1" (29.00m)
Net reach beyond outriggers: at 29°
82' 9" (25.21m)
Outrigger spread L - R - front hydraulically swing out and extend down
28' 1" (8.57m)
Outrigger spread L - R - rear hydraulically telescope out and extend down
26' 7" (8.10m)
Outrigger load: Front
52,605 lbf (234kN)
All data provided is based on experience and depends on the material used. Specifications subject to change without prior notice, no responsibility is taken for the correctness of this information. Other data can be obtained on request.