Voltar à visão geral

28Z-Meter

Smaller Size, Greater Flexibility

Putzmeister’s 28Z is available in a compact size and offers increased flexibility. This means that maneuvering congested job sites is now easier. Its short vehicle length without the overhang and smaller outrigger footprint allows easy set-up in tight areas. The versatile four-section Multi-Z boom with 89 feet 7 inches (27.3 meters) of vertical reach makes it convenient to place concrete in tricky places.

Straighter pipes mean less stressful flow and less wear on parts guaranteeing a longer life. The detach boom option is ideal for situations where frequent boom transfers are required. Putzmeister’s Econo-Gear™ technology allows improved fuel efficiency by performing operations like setup, pumping and cleanup at lower engine speeds. This ensures reduced stress on wear parts and lowers noise levels.

The 28Z-Meter comes with the latest Ergonic®3.0 Control System.

Características principais

  • High-pressure application
  • Single proximity switch in each position
  • HBC-Radiomatic power boost and frequency hopping remote control system
  • Lightweight EZ Clean Out RS 909 hopper
  • Detach boom feature is ideal for frequent boom transfers

Informações gerais

  • Braços
    4
  • Tipo de abertura
    Multi-Z
  • Alcance Vertical
    27.3 m
  • Alcance Horizontal
    23.7 m
  • Alcance pela Frente do Camião
    21.2 m
  • Alcance de Profundidade
    16.6 m
  • Altura de Desdobramento
    6.5 m
  • Rotação
    365°
  • Extremidade da Mangueira - Comprimento
    3 m
  • Mangueira Terminal - Diâmetro
    125 mm
  • Tamanho da Tubulação (ID) Extremidades métricas
    DN 125/5.5/85 bar
  • Espalhamento do suporte E-D - frente hidraulicamente estendida para fora e para baixo
    6.23 m
  • Outrigger spread: L-R-rear hydraulically extend down
    2.62 m
  • Comprimento x Largura x Altura
    10.24 x 2.62 x 3.82 m
  • Peso do Eixo Dianteiro
    7200 kg
  • Peso do Eixo Traseiro
    13800 kg
  • Peso total aproximado
    21000 kg

Configuração

  • Diâmetro do Cilindro de Material-Comprimento do Curso
    250/2100 mm
  • Saída (lado do pistão)
    170 m³/hr
  • Pressão (lado do pistão)
    85 bar
  • Cursos (lado do pistão)
    27
  • Diâmetro do Cilindro de Material-Comprimento do Curso
    230/2100 mm
  • Saída (lado de haste)
    160 m³/hr
  • Saída (lado do pistão)
    108 m³/hr
  • Pressão (lado de haste)
    85 bar
  • Cursos (lado de haste)
    31

Folhetos e fichas técnicas